Trygar's Locksmith

All locksets are available keyed alike for no additional charge.
Masterkeying available. Call for details on keyed alike or masterkeyed locks.

ENTRY LEVER LOCKSET
COMMERCIAL GRADE - Y3 SERIES
$79.95

Mintcraft entry lock

Silver finish. For keyed exterior or interior doors. Both levers locked or unlocked by key outside or turnbutton inside. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway. Seamless one-piece lever for extra strength. BACKSET: 2-3/4", DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage. With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-3/4 STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. Please follow installation instructions carefully. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating. Made in Taiwan by MintCraft.

ENTRY LOCKSET
COMMERCIAL GRADE - C3 SERIES
$37.95

MintCraft enrty lock

Silver finish. For keyed exterior or interior doors. Both knobs locked or unlocked by key outside or turnbutton inside. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway. Seamless one-piece knob for extra strength. BACKSET: 2-3/4", DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage. With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. U.L. Approved 3-Hour Fire Rating. Made in Taiwan by MintCraft.

STOREROOM LOCKSET
COMMERCIAL GRADE - C3 SERIES
$49.95

MintCraft Storeroom lock

Outside knob always locked, inside knob always free; key outside retracts latch. Silver finish. For keyed exterior or interior doors. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway. Seamless one-piece knob for extra strength. BACKSET: 2-3/4", DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage. With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. U.L. Approved 3-Hour Fire Rating. Made in Taiwan by MintCraft.

Padio Door Handle Set
$49.95
Clearance only 1 left

Face plates are 8-3/4 inches high by 1-1/16 inches wide. Screw holes on rear of face plates are 8 inches center to center. Handle hole to turn button hole in 3-10/16 center to center. Handle is 4-1/2 inches long. Atrium 820 2228/3716K 70mm. PZ inside only.

Schlage Handle Set
$89.00
Chrome finish
F160N-V-MUR-625-ORB
Clearance only 1 left

Hyundai Ignition Cylinder
$15
Clearance only 1 left

Mazda Door Cylinder
$10
Clearance only 1 left

Honda Ignition Cylinder
$15
Clearance only 1 left

Toyota Truck lock
$10
Clearance only 1 left

Kwikset Deadbolt Bolts
Solid Bolts - No Plastic parts
Call, email or come to our store to purchase

2-3/8 inch backset light duty $3.99
2-3/4 inchbackset light duty $4.99
2-3/4 inch backset heavy duty 5.49
2-3/8 2-3/4 adjustable backset $5.99
Kwikset deadbolt bolts