Wiring The Beast    

	This is the almost finished panel where the Mallory Hyfire VI and the Haltech F10 reside. Also the fuses and the relays required for this car to run live here also. This is the space behind the driver's seat.
	With the F10 removed you can now see where all the connections between the panel, the car's wiring, the F10, and the Mallory are  done at. The F10 sits on a pair of brackets (not yet attached) above these two terminal strips.
	The dash is almost done. I found the number of hours to build these pieces was MUCH higher than  I originally thought. Some details are still left but they will wait until after paint.
	The new dash panel that replaces the left glove box. Just missing a couple of small details
	The speedo pod. This was made from a broken original that was junk. By bonding the stainless steel face plate to the broken and crumbling original pod, I was able to save it and make this jewel.
	Working on the wiring. Just about everything has its place now. Still have to do the fuel rails and lines plus the vacuum lines
	This is it.

Back to The Shop