1. Press the menu button on the remote control
2. Highlight INSTALLATION and press OK, ( the installation
screen will be displayed )
3. Highlight TP CONFIGURATION and press OK
4. Highlight SATELLITE and press OK Button and scroll
through the satellites to select Telstar 5 . Press OK.
5. TO go to the freq. lines press the volume button
up or down .
6. Using the channel down button scroll down and
highlight the freq. 11898 line and press OK .
7. The frequency signal meter screen will be displayed
, You must get the signal on the second Q signal bar
too , if not then start
adjusting your dish to get the best signal .
8. After you get the best signal , select Search
Channel and press OK .
9. IF the feq. you are looking for is not on the
list, press the volume down arrow to go to Add then press OK.
Using the remote control enter
frequency, symbol rate , and polarity , then go to search channel and press
OK. Once the search is finished
, press menu to go bach to the previous menu .
10. Now you can view the channels by pressing the menu button,
select TV CHANNELS , press OK, a list of all
channels will be displayed,
highlight the channel you want to watch, press OK to view it .
1. Press the menu button, select installation,
press ok, select EDIT TV LIST < press OK.
2. Highlight the channel you want to edit its
name, press INFO, press OK, a small screen will be displayed
that have all the letters
. To view number Press the INFO button .
3. TO select the letter you want use the volume
and channel up & down buttons to highlight them, then
press OK, continue
untill you get all the letters you want. Once you have finished then press
MENU,
press MENU again.
The new name for the channel will be displayed on the TV List .