• Structural engineering for a 5,000 sq ft bank that included a UL Class 2 vault, three remote teller lanes, an automatic teller lane, and a 42 foot square lobby/teller area that is vaulted and column free. The construction utilized a minimum of steel framing, steel web wood joists, and conventional wood framing supported on a spread foundation.

Lehigh Construction Group, Orchard Park, NY

• Structural engineering and drawing preparation for a 6,800 sq ft office and 5,700 sq ft warehouse building utilizing steel bar joists and load bearing masonry.

Marine Midland Arena, Buffalo, NY

• Structural engineering for a fall protection system consisting of seven cable layouts with over 2,800 lineal feet of cable.

Orchard Park Orthopedics, Orchard Park, NY

• Structural design of a 14 ft x 52 ft addition to an existing medical facility. Design included three options for the roof framing to accommodate scheduling, masonry walls, and foundation.

Fallside Resort, Niagara Falls, NY

• Structural analysis and design of cold-formed steel trusses for a new 20 ft x 52 ft entrance canopy.

Langden Properties, 1165 Delaware Avenue, Buffalo, NY

• Structural investigation into the cause of the deterioration of the precast concrete and brick parapet of a late 1920's apartment building.

Horschel Reality, Springville, NY

• Structural engineering for a 24,000 sq ft machine shop with provisions for a future addition and a 6,800 sq ft office. The building is constructed of load bearing masonry walls and steel roof joists supported on shallow footings.

Tops Markets, Structural engineering and drawing preparation including:

• Design of all cast-in-place concrete, including spread footings or caissons, retaining walls, loading docks, truck ramps, and slabs-on-grade.

• Design of all structural steel including roof system, joists, joist girders, beams, girders, columns, and base plates.

• Specifications for cast-in-place concrete, structural steel, joists, and metal decking.

• For the following locations: Erie, PA                  77,000 sq ft
                                           Elmira, NY             77,000 sq ft
                                           West Seneca, NY  92,000 sq ft

Clover Management, Inc., Inc., Williamsville, NY

• Investigation of a 66,000 sq ft six story load bearing masonry building to repair cracking in the exterior brick and block walls.

Baxter Healthcare, Depew, NY

• Structural engineering for a 153,000 sq ft steel framed warehouse and office building.

Hamburg Offset Printing, Inc., Hamburg, NY

• Structural engineering and drawing preparation for a 6,000 sq ft facility with provisions for a future addition and a 2,400 sq ft office. The building is constructed of load bearing masonry walls and steel roof joists supported on shallow footings.

BJ’s Wholesale Plaza Allegheny, NY

• Structural engineering and drawing preparation for a 250,000 gallon cast-in-place concrete underground water storage reservoir designed to support HS-20 truck traffic above.

Pre-Engineered Metal Buildings, Architectural and Structural design of the following:

• 22,300 sq ft skating facility, Clarence, NY
• 92,000 sq ft production and office facility, Alden, NY
• 100,300 sq ft warehouse and office facility, Buffalo, NY
• 83,620 sq ft warehouse, Tonawanda, NY
• 26,800 sq ft metal recycling facility, Buffalo, NY

For additional projects Click Here