Boat Yard V

5-21-03

The gussets and floor timbers are bolted to the frame members with 18-8 Stainless Steel bolts and screwed to the filler blocks with Silicon Bronze screws.

The frames are all up except the transom. Back to the work shop to build the transom.

8-18-03

After a summer break, the transom is on the frame table. This thing is really going to be heavy.  Double bottom members and two layers of 3/4" plywood. This aught to be fun to get up onto the building form.

8-20-03

Here she is all coated with epoxy and ready to go to the building form.

To the right is a picture of the brackets I installed on the end of the building form to hold the transom in place. Now I just have to get it up there.