 |
I think I have found the perfect way to
store my stereo realist slides!
(not only slides taken with a Stereo Realist but all stereo slides
mounted in standard 41x101mm frames)
|
This 2x4x6 inch clear plastic box will neatly fit 46-55 RBT stereo slides or over 100 cardboard slides!
 |
<--- 46 RBT slides or 55 RBT slides (above) |
But, wait, there is more!
You can separate the two halves and use them as projection trays with the Bracket dissolver/fader or any other projector!
 |
Plus...
Each box is supplied with two strips of foam tape. This tape can be used to pick up the slack at the top of the slides because the height of the box is 2 inches (50mm), while each slide is 41mm tall. The foam is 1/2 inch thick (12mm) so it holds the slides tight. Just look at these pictures:
 |
 |
The tape has one self-adhesive side, if you peel it, but you don't have to do that. I have cut it a bit longer so it fits without adhesive. And you don't have to use both pieces, one will do the job. Here are two examples:
 |
Left: One piece of tape, held with friction only. |
Note: These boxes are a bit fragile, so be careful. Also, they might have a minor scratch or two. I will try to get you the best ones.
If boxes is not your thing and you prefer slide pages, I have these too!
So, what it is going to be? Boxes or pages? I personally use both!
Also, please check my stereo store or my ebay auctions for price and payment information
Updated: November 2007