2004 / DB reference year
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Stefanini, Cesare; Cutkosky, Mark R.; Dario, Paolo ; CRIM - Scuola Superiore Sant'Anna, 56127 - Pisa, Italy
Source Proc IEEE Int Conf Rob Autom v 2 2003 p 1836-1841 2003 IEEE International Conference on Robotics and Automation Sep 14-19 2003 Taipei, Taiwan
Abstract This paper presents a new miniature gripper design, suitable for endoscopic surgery and similar applications. The gripper is based on a mechanism fabricated in-situ via a rapid prototyping process that permits multiple materials and the addition of embedded components. The gripper is actuated using a tuned vibrating mass and impact mechanism. The mechanism relies on close tolerances and clearances, obtained by depositing and subsequently removing thin films of sacrificial material. The gripper design and fabrication process are scalable, and future versions of the gripper can be made at a fraction of the size of the first 15 mm prototype without incurring manufacturing difficulty. Tests on the first prototype reveal the importance of controlling friction and preload at the sliding interface. [References: 9] (Auth abstract) XX