Use the browser's BACK button to return to the SEARCH RESULTS
pages.
2004 / DB reference year
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Mom's Search Page
| Next
| Contents
Table of Contents - 2004; 2003 (Backfills for previous years)
1. forming of intermetallics by reactive rapid prototyping
2. 3D FE simulation for temperature evolution in the selective laser sintering process
3. 3D surface reconstruction based on gray image in reverse engineering
4. 5-year experience of industrial operation of the first domestic LOM-based system "Karat-200"
5. A 3D surface offset method for STL-format models
6. A binary morphology-based filtering algorithm for reverse engineering
7. A ciliary based 8-legged walking micro robot using cast IPMC actuators
8. A consolidated methodology for business process reengineering
9. A finish machining strategy for rapid manufactured parts and tools
10. A generic algorithm for a best part orientation system for complex parts in rapid prototyping
11. A high force miniature gripper fabricated via shape deposition manufacturing
12. A layer-based virtual prototyping system for product development
13. A low cost cutter-based paper lamination rapid prototyping system
14. A method for the design and fabrication of heterogeneous objects
15. A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering
16. A new approach of online waste removal process for laminated object manufacturing (LOM)
17. A new curve-based approach to polyhedral machining
18. A new measuring fixator design for humeral supracondylar corrective osteotomies in children
19. A new measuring fixator design for humeral supracondylar corrective osteotomies in children
20. A new rapid manufacturing process for multi-face high-speed machining
21. A new rapid prototyping system and research on its technical parameter
22. A note on rapid manufacturing process of metallic parts based on SLS plastic prototype
23. A novel method for early formal developments using computer aided design and rapid prototyping technology
24. A novel remote measurement and monitoring system for the measurement of critical washing parameters inside a domestic washing machine
25. A numerical and experimental study of fracture in RP stereolithography patterns and ceramic shells for investment casting
26. A pencil probe system for electrochemical analysis and modification in nanometer dimensions
27. A process to make collagen scaffolds with an artificial circulatory system using rapid prototyping
28. A rapid manufacturing method for water-saving emitters for crop irrigation based on rapid prototyping and manufacturing
29. A reverse glue approach to automated construction of multi-piece molds
30. A review of conventional and modern single-point sheet metal forming methods
31. A study of recoating in stereolithography
32. A study on effects of process parameters in rapid freeze prototyping
33. A study on green tapes for LOM with water-based tape casting processing
34. A study on the influence of the sloped cutting angle on kerfwidth and part quality in the hotwire cutting of EPS foam for the VLM-s rapid prototyping process
35. A three dimensional model for direct laser metal powder deposition and rapid prototyping
36. A volumetric difference-based adaptive slicing and deposition method for layered manufacturing
37. A web-based custom service system for rapid prototyping
38. Acoustic control of powder dispensing in open tubes
39. Adaptive ruled layer approximation and slicing for 3D rapid prototyping
40. Alumina-doped silica gradient-index (GRIN) lenses by Slurry-based Three-dimensional Printing (S-3DP [trademark] )
41. An adaptive slicing approach to modelling cloud data for rapid prototyping
42. An experimental design approach to selective laser sintering of low carbon steel
43. An integrated and automated process planning system for advanced machining environment
44. An integrated optical biochemical sensor fabricated using rapid-prototyping techniques
45. An introductory digital design course using a low-cost autonomous robot
46. An investigation of the capability profile of the three dimensional printing process with an emphasis on the achievable accuracy
47. An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
48. An original approach for the memorisation and the generation of rapid product development processes
49. Analysis of rapid manufacturing - Using layer manufacturing processes for production
50. Analysis of the part deformation in stereo-lithography based on FEA
51. Analysis of the wear characteristics of an EDM electrode made by selective laser sintering
52. Application of an X-ray microscopy technique to evaluate tissue-engineered bone-scaffold constructs
53. Application of rapid prototyping with selective laser sintering in digital casting
54. Application of similitude techniques to functional testing of rapid prototypes
55. Approach of integrating functionally gradient material information based on STEP
56. Assembly and disassembly processes in product life cycle perspectives
57. Auburn Engineering counts on DSM Somos SL resins to deliver Chevy's new SSR
58. Automated construction by contour crafting - Related robotics and information technologies
59. Automatic fabrication for bridged laminated object manufacturing (LOM) process
60. AZ80 and ZC71/SiC/12p closed die forgings for automotive applications: Technical and economic assessment of possible mass production
61. Band Gap Modification of Diamond Photonic Crystals by Changing the Volume Fraction of the Dielectric Lattice
62. Baseline formation for damage diagnosis in one dimensional-beam problems
63. Binder removal studies in ceramic thick shapes made by laminated object manufacturing
64. Biochemical IC chips fabricated by hybrid microstereolithography
65. Biomaterial forming research using RP technology
66. Birmingham shapes up to rapid manufacturing
67. Bladeless blood pump feasibility of the design as an LVAD device
68. Bone tissue scaffold technologies based on RP adopted droplet assembly
69. Bremen sets the pace in PM research
70. CAD/CAM software for an industrial laser manufacturing tool
71. Calculation and verification of rotation angle of a four-axis hotwire cutter for transfer-type variable lamination manufacturing using expandable polystyrene foam
72. Carry on milling
73. Cast prototypes of reinforced nylon 6 match injection molded quality
74. Ceramic components for foundry industry
75. Ceramic microfabrication by rapid prototyping process chains
76. Ceramic synthetic substrates using solid freeform fabrication
77. Challenges in integrating nondestructive testing and finite element methods for realistic structural analysis
78. Characterisation of aluminium alloy 6061 for the ultrasonic consolidation process
79. Characterisation of collagen scaffolds using x-ray microtomography
80. Characterization of laser direct deposited metallic parts
81. Characterization of microfeatures in selective laser sintered drug delivery devices
82. Characterization of Ti-Al-Er alloy produced via direct laser deposition
83. Coalescence behaviour of two metallic particles as base mechanism of selective laser sintering
84. Cold gas dynamic manufacturing - A new approach to near-net shape metal component fabrication
85. Comments on "solid freeform fabrication by extrusion and deposition of semi-solid alloys" (multiple letters)
86. Comparative analysis of injection systems for manufacturing parts
87. Comparison of laser based rapid prototyping techniques
88. Complex ceramic-polymer composite microparts made by microstereolithography
89. Composition control in the direct laser-deposition process
90. Computational design, freeform fabrication and testing of Nylon-6 tissue engineering scaffolds
91. Computational models for biological tissues and biomedical implants
92. Conditions of selective laser sintering in Al-Ti powdered system
93. Contact thermal conductivity of a powder bed in selective laser sintering
94. Control of microwave emission from electromagnetic crystals by lattice modifications
95. Control of the viscous behavior of highly concentrated mullite suspensions for robocasting
96. CS file - An improved interface between CAD and rapid prototyping systems
97. Curl distortion analysis during photopolymerisation of stereolithography using dynamic finite element method
98. Dental restoration through laser densification of dental porcelain powder
99. Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research
100. Design and validation of a universal 6D seam tracking system in robotic welding based on laser scanning
101. Design for medical rapid prototyping of cranioplasty implants
102. Design of a 3-degrees of freedom platform for the stereolithography apparatus
103. Design of fused-deposition ABS components for stiffness and strength
104. Design opportunities with rapid manufacturing
105. Determining the surface form of polystyrene through the coordinate measurement machine
106. Determining, understanding and controlling the morphology of injection moulded parts produced in stereolithography moulds
107. Development of a microreactor as a thermal source for microelectromechanical systems power generation
108. Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: Investigation and classification
109. Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: Parametric library and assembly program
110. Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
111. Development of divisional parallel scan technology in large-scale laminated object manufacturing
112. Development of five-axis laser cutting system for the tangent cutting solid freeform fabrication system
113. Development of grinding wheels by stereolithography and investigation of its characteristics
114. Development of porous polymer-ceramic composites as bone grafts
115. Development of portable fuel cell arrays with printed-circuit technology
116. Development of PZT suspensions for ceramic ink-jet printing
117. Development of the laser additive processing technology
118. Development of transfer type variable lamination manufacturing (VLM-ST) process
119. Digital clay: Architecture designs for shape-generating mechanisms
120. Digital custom denture design with new abrasive computer tomography and rapid prototyping technologies
121. Direct fabrication of patterned functional ceramic films by soft solution processing without post-firing
122. Direct laser fusing to form ceramic parts
123. Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts
124. Direct laser sintering of a silica sand
125. Direct selective laser sintering of iron-graphite powder mixture
126. Direct slicing and its application to rapid prototyping
127. Direct Slicing from AutoCAD Solid Models for Rapid Prototyping
128. Direct spray metal rapid tooling using fused deposition modelling
129. Direct-write process for UV-curable epoxy materials by inkjet technology
130. Direct-write processes as enabling tools for novel antenna development
131. Distortion minimization of laser-processed components through control of laser scanning patterns
132. Droplet-based freeform fabrication of aluminum objects through internet
133. Dual material rapid prototyping techniques for the development of biomedical devices. Part 2: Secondary powder deposition
134. Dynamic UV microstereolithography
135. Editorial
136. Editorial
137. Editorial
138. Editorial
139. Editorial: Faster, better, cheaper
140. Effect of slice thickness on the profile accuracy of model maker rapid prototyping measured by a circular triangulation laser probe
141. Effect of tool finishing on ejection forces for injection moulded parts made using direct metal laser sintered tools
142. Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping
143. Effects of scanning path on the deposition process in rapid plasma spray tooling: Modeling by homogenization theory
144. Electromagnetic properties of photonic crystals composed of normal and inverse diamond structure with graded lattice spacings
145. Electromagnetic properties of photonic crystals with diamond structure containing defects
146. Electromagnetic wave diffractions in ceramic/polymer photonic crystals with three-dimensional diamond structure
147. Emission control of electromagnetic wave by using diamond photonic crystals with graded lattice spacing
148. Engineered cellular response to scaffold architecture in a rabbit trephine defect
149. Engineering Plastics for functional prototypes
150. Environmental effects on the dimensions of SL5195 resin
151. Erratum: Solid freeform fabrication by extrusion and deposition of semi-solid alloys (Journal of Materials Science Letters (2003) 22 14 (1049))
152. Error-based segmentation of cloud data for direct rapid prototyping
153. Evaluating the use of aluminum inserts on SL puzzle molds for injection molding of complex parts: A case study
154. Evaluation of rapid prototypes obtained from reverse engineering
155. Evaluation of thermal- and photo-crosslinked biodegradable poly(propylene fumarate)-based networks
156. Expected and unexpected achievements and trends in radiation processing of polymers
157. Experience in laser stereolithography and its application in manufacturing wind-tunnel aerodynamic models of various purposes
158. Experimental studies on the accuracy of wax patterns used in investment casting
159. Experimental study on the ice pattern fabrication for the investment casting by rapid freeze prototyping (RFP)
160. Extension of surface reconstruction algorithm to the global stitching and repairing of STL models
161. Extrusion freeforming of ceramics through fine nozzles
162. Eyes right
163. Fabrication of advanced functional electroceramic components by Layered Manufacturing (LM) methods
164. Fabrication of artificial bioactive bone using rapid prototyping
165. Fabrication of biomedical prototypes with locally controlled properties using FDM
166. Fabrication of cellular poly-ε-caprolactone (PCL) scaffolds by precision extruding deposition process
167. Fabrication of ceramics with designed porosity
168. Fabrication of mesoscale energy storage systems by laser direct-write
169. Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition
170. Fast models
171. Fast-track formula
172. Feasibility of a high-temperature polymer-derived-ceramic turbine fabricated through micro-stereolithography
173. Femtosecond laser machining of steel
174. Ferroelectric polarization reversal of polymers under high hydrostatic pressure
175. Finite element analysis of distortion minimization in layer-by-layer laser-processed components
176. Formation of Copper-Based Metal Part via Direct Laser Sintering
177. Fractal scanning path generation and control system for selective laser sintering (SLS)
178. Freeform fabrication - History and current processes
179. Freeform fabrication of aqueous alumina-acrylamide gelcasting suspensions
180. Freeform fabrication of nylon-6 tissue engineering scaffolds
181. Freeform fabrication of Ti3SiC2 powder-based structures: Part II - Characterization and microstructure evaluation
182. Freeform fabrication of Ti3SiC2 powder-based structures: Part I - Integrated fabrication process
183. Freeform gelcasting of porous tubular alumina substrate
184. From CT scan to ceramic bone graft
185. From Russia with respect
186. Functional prototype development: Inner visible multi-color prototype fabrication process using stereo lithography
187. Functionally graded copper - Steel using LENS [trademark] process
188. Fundamental experimental study on selective electro-deposition rapid prototyping with electrolyte jet
189. Gas phase solid freeform fabrication
190. Genesis of a new process: Magnesium lost foam casting
191. Geometric algorithms for automated design of multi-piece permanent molds
192. Geometric simulation of NC machining based on STL models
193. Geometric tailoring: A design for manufacturing method for rapid prototyping and rapid tooling
194. Growth of net-shape PMN-PT single crystal components by Fused Deposition of Ceramics (FDC) and templated grain growth (TGG) techniques
195. Guest editorial
196. Heading for a showdown
197. Heat flux canals (HFC) technique: An alternative to cool down stereolithography moulds
198. High density multi-layer connection technology for MEMS and CMOS applications
199. High density net shape components by direct laser re-melting of single-phase powders
200. High frequency dielectric relaxation in polymers filled with ferroelectric ceramics
201. Homogenization modeling of capillary forces in selective laser sintering
202. How rapid prototyping materials broaden applications for stereolithography
203. Hydrodynamic Design System for Pumps Based on 3-D CAD, CFD and Inverse Design Method
204. Hydroxyapatite cement scaffolds with controlled macroporosity: Fabrication protocol and mechanical properties
205. Image reconstruction of the ear and face by laser scanning
206. Image-based biomimetic modeling and its application in computer-aided tissue engineering
207. Impact of a ceramic microchannel heat exchanger on a micro turbine
208. Impact of rapid manufacturing on design for manufacture for injection moulding
209. Implementing rapid tooling design in an undergraduate curriculum
210. Improved surface finish in 3D printing using bimodal powder distribution
211. Improvement of surface finish by staircase machining in fused deposition modeling
212. In Vivo Efficacy of Bone-Marrow-Coated Polycaprolactone Scaffolds for the Reconstruction of Orbital Defects in the Pig
213. In-situ reactive processing of nickel aluminides by laser-engineered net shaping
214. Increased accuracy by using dynamic finite element method in the constrain-surface stereolithography system
215. Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting process
216. Influence of laser parameters on part performances in selective laser sintering
217. Integration of reverse engineering and rapid tooling in foundry technology
218. Interaction devices for hands-on desktop design
219. Internet-based design visualization for layered manufacturing
220. Internet-based reverse engineering
221. Investigation of an electrophotography based rapid prototyping technology
222. Investigation of fully dense laser sintering of tool steel powder using a pulsed Nd: YAG (neodymium-doped yttrium aluminium garnet) laser
223. Investigation of jet electroforming oriented by rapid prototyping
224. Investigation of layer thickness and surface roughness in rapid freeze prototyping
225. Investigation of shrinkage-induced stresses in stereolithography photo-curable resins
226. Investigation on selective laser sintering of nanocrystalline ceramic powders
227. Kind of artificial intelligent method and system for automatic optimization of selective laser sintering process
228. Laser assisted rapid prototyping in Japan
229. Laser beam spot online inspection and position compensation in stereolithography apparatus
230. Laser direct-write of alkaline microbatteries
231. Laser direct-write of metal patterns for interconnects and antennas
232. Laser fabrication of affective 3D objects with 1/f fluctuation
233. Laser path planning of burn-out rule for LOM process
234. Laser Reactive Formation of Ti/TiN in Situ Composite
235. Laser Sintering of Silica Sand - Mechanism and Application to Sand Casting Mould
236. Laser synthesis of functional graded filter elements from metal-polymer powder compositions
237. Lasers and materials in selective laser sintering
238. Lasers for solid imaging
239. Launch your new products/services better, faster
240. Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition
241. Layered manufacturing: Challenges and opportunities
242. Liquid acrylate-endcapped biodegradable poly(ε-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs
243. Liquid photocurable biodegradable copolymers: In vivo degradation of photocured poly(ε-caprolactone-co-trimethylene carbonate)
244. Low-temperature extrusion manufacturing of poly (L-lactic acid)/tricalcium phosphate composite scaffolds for bone tissue engineering
245. Make RP models in end-product material
246. Making bones about it
247. Manufacturing and Applications of Polymer and Ceramic MEMS from a Novel Material-Process for Harsh Environments
248. Materials and design concepts for high performance compressor components
249. Materials for freedom fabrication of GHz tunable dielectric photonic crystals
250. Materials opportunities in layered manufacturing technology
251. Mathematical model for simulating axisymmetric rod growth with kinetically limited and mass transport limited rates
252. Measurement of temperature field during laser sintering of polymer-coated metal powder
253. Mechanical and piezoelectric properties of laminated object manufactured ceramics
254. Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling
255. Mechanical characterization of parts fabricated using fused deposition modeling
256. Melting-solidifying characteristic of Ni-based alloy powders by selective laser sintering
257. MEMS based Active Skin for Turbulent Drag Reduction
258. Metal spray tooling for composite forming
259. Methods for improving the quality of RP models made from sheet materials
260. Micro heat pipes in low temperature cofire ceramic (LTCC) substrates
261. Micro-CT characterization of fusing extruded PCL scaffolds
262. Micro-stereolithography photopolymer solidification patterns for various laser beam exposure conditions
263. Microfabrication of ceramics by rapid prototyping process chains
264. Micromini ceramics sport supersized properties
265. Micron-sized tools are driven by light
266. Microplasma powder deposition as a new solid freeform fabrication process
267. Microrobotics using composite materials: The micromechanical flying insect thorax
268. Microstereolithography: A review
269. Microstructural evolution and mechanical properties of Rapidsteel 2.0
270. Modeling of selective laser sintering for PC powder
271. Modelling and measuring the thermal behaviour of the molten pool in closed-loop controlled laser-based additive manufacturing
272. Modelling cloud data using an adaptive slicing approach
273. More than a pretty face
274. Morphology and properties of selective laser sintered bisphenol a polycarbonate
275. Mould quotations - As easy as 1, 2, 3?
276. Multi-material and advanced geometry deposition via laser chemical vapor deposition
277. Multilayer telescopic piezoactuator fabricated by a prototyping process based on milling
278. Nanofiber-reinforced polymers prepared by fused deposition modeling
279. Nanoscale dispensing of liquids through cantilevered probes
280. Net shape manufacturing with metal alloys
281. Net shaping via aluminium foaming
282. Net-shaping of ceramic components by direct ceramic machining
283. New ferro powder for selective laser sintering of dense parts
284. New high technology machining facility
285. New informationization tele-service system of rapid prototype manufacturing
286. New methods for development of three-dimensional ceramics based on barium hexaferrite with chromium additives
287. New stereolithography material runs rings round jewellery manufacturing times
288. Nonlaminate micro photo-stereolithography using LCD live-motion mask
289. Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication
290. Novel piezoelectric actuators for tuning an optical fiber Bragg grating
291. Numerical analysis of a mask type stereolithography process using a dynamic finite-element method
292. On an universal design for controller of home care equipments
293. On the development of direct metal laser sintering for rapid tooling
294. On the use of SLS tools in sheet metal stamping
295. On the use of stereolithography for the manufacture of photoelastic models
296. One new energy source used in line scan rapid prototyping system
297. Optical 3D-sensing and CAD/CAM for medicine and art conservation
298. Optimal connection of loops in laminated object manufacturing
299. Optimization and modeling of laser forming of stainless steel circular sectors
300. Optimization of design parameters of a pneumatic system for solid freeform fabrication system using genetic algorithm
301. Optimization of Plasma Deposition Manufacturing Parameters Using a Hybrid ANN-GAs method
302. Organ printing: Computer-aided jet-based 3D tissue engineering
303. Overview of layer manufacturing technologies, opportunities, options and applications for rapid tooling
304. Oxygen diffusion in ceramic suspensions for stereolithography
305. Part shrinkage anomilies from stereolithography injection mould tooling
306. Performance of degradable composite bone repair products made via three-dimensional fabrication techniques
307. Performance of hydroxyapatite bone repair scaffolds created via three-dimensional fabrication techniques
308. Photopolymerization kinetics of an epoxy based resin for stereolithography calorimetric analysis
309. Physical Aspects of Process Control in Selective Laser Sintering of Metals
310. Physical human lumen carotid reconstruction: Life-size models by rapid prototyping
311. Picking up the pace of rapid manufacturing
312. Piezoelectric properties of novel oriented ceramic-polymer composites with 2-2 and 3-3 connectivity
313. Pillow-shaped distortion of correction algorithm of galvanometric scanning system
314. Polymer melting and polymer powder sintering by thermal analysis
315. Potentialities of spiral computed tomography in the diagnosis and treatment of traumatic injuries of the midface
316. Predictive mechanical performance evaluation of consumer food cans using stereolithography models
317. Preparation of (BaxSr1 - x)TiO3 sols used for ceramic film jet-printing
318. Procedure for rapid fabrication of non-assembly mechanisms with embedded components
319. Proceedings of SPIE: Smart Sensors, Actuators, and MEMS
320. Proceedings of the Heat Transfer Division - 2002 volume 5: Transport Phenomena in Manufacturing and Materials Processing, Environmental Processing, Low Temperature Heat Transfer
321. Process and properties control in laser aided direct metal/materials deposition process
322. Process control of reactive rapid prototyping for nickel aluminides
323. Process control of reactive rapid prototyping for nickel-aluminides-II
324. Process speeding up via deposition planning in fused deposition-based layered manufacturing processes
325. Processing conditions and mechanical properties of high-speed steel parts fabricated using direct selective laser sintering
326. Processing issues associated with reinforced polymers for use with solid freeform fabrication
327. Processing of carbon nanofiber reinforced silicon nitride matrix composites
328. Production of honeycomb structures based on rapid prototyping process leftovers
329. Proton beam writing of passive waveguides in PMMA
330. Prototypes for Neonatal Surgery
331. Prototyping faster, cheaper and virtually
332. Prototyping materials reach higher performance levels
333. Pseudo-alloys for spray metal tooling
334. PU strikes a chord
335. Quasi-steady state natural convection in laser chemical vapor deposition with a moving laser beam
336. Rapid development of products with curved surfaces based on point cloud data
337. Rapid development of spin cast zinc parts using rapid tooling technologies
338. Rapid experimentation in complex internal flow passages using SLA and MRV
339. Rapid fabrication and replication of metal, ceramic and plastic mould inserts for application in microsytem technologies
340. Rapid fabrication of aluminum shoe mold using vacuum sealed casting process
341. Rapid fire
342. Rapid laminated die-cast tooling
343. Rapid laminated tooling
344. Rapid manufacture of metal tooling by rapid prototyping
345. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives
346. Rapid manufacturing of 3D shaped products by multi-face high-speed machining
347. Rapid manufacturing of aluminum components
348. Rapid manufacturing of metal matrix composite materials using three-dimensional printing (3DP [trademark] )
349. Rapid manufacturing techniques in the development of an axial blood pump impeller
350. Rapid manufacturing with direct metal laser sintering
351. Rapid prototyping - Just starting, or nearing the end?
352. Rapid prototyping and its application in architectural design
353. Rapid prototyping and rapid tooling - The key enablers for rapid manufacturing
354. Rapid prototyping and structure generation using three-dimensional nanolithography with electron beam induced chemical reactions
355. Rapid Prototyping Applications in the Treatment of Craniomaxillofacial Deformities - Utilization of Bioceramics
356. Rapid prototyping
357. Rapid prototyping densified metal components by laser cladding
358. Rapid prototyping enables development of complex ceramic parts
359. Rapid prototyping for self-similarity design
360. Rapid prototyping for treatment of canine limb deformities
361. Rapid prototyping helps Renault F1 team UK improve championship prospects
362. Rapid prototyping manufacturing based on cloud data from free form surface
363. Rapid prototyping models and their quality evaluation using reverse engineering
364. Rapid prototyping of complex-shaped Al2O3 ceramics by the lost mould method
365. Rapid prototyping of sheet metal components by plasma-jet forming
366. Rapid prototyping or rapid production? 3D printing processes move industry towards the latter
367. Rapid prototyping using direct laser deposition - The effect of powder atomization type and flowrate
368. Rapid prototyping with lasers using metal powder jets
369. Rapid prototyping, CAD/CAM and human factors
370. Rapid reproduction for museum exhibit
371. Rapid stereolithography, prototyping selective laser sintering, and polyjet
372. Rapid tooling - It's not rocket science
373. Rapid tooling using plasma spraying and rapid prototyping
374. Rapid tooling: Selective laser sintering injection tooling
375. Rapid-prototyping resins
376. Re-engineering the roto-casting mould making process
377. Real time adaptive slicing for fused deposition modelling
378. Really rapid prototyping
379. Recent developments in metal laminated tooling by multiple laser processing
380. Recognising materials power
381. Research and advancement in laser direct deposition
382. Research on laminated object manufacturing for the functional parts based on new LOM
383. Research on microstructure and mechanical properties of laser direct deposited Ti-6Al-4V alloy
384. Research on scanning strategy for UV light rapid prototyping system
385. Research on shape of solidified resin in stereo-lithography
386. Research on solidification of photo-curing resin in stereo lithography (Effect of resin properties on curing of resin and dimensional estimation of cured resin)
387. Research on solidification of resin in stereolithography
388. Research on stereolithography technology using in MEMS
389. Research on technique of adaptively laminated manufacturing based on adjusting the posture of laminated tool
390. Research on the connecting method for boundary compensating curves in rapid prototyping direct slicing
391. Rheological properties of PZT suspensions for stereolithography
392. RSP tooling
393. Safety active catheter with multi-segments driven by innovative hydro-pressure micro actuators
394. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends
395. Sectional medical image processing and applications in orthopaedics
396. Segmentation algorithm for cross-section bone images in rapid prototyping manufacture
397. Selective laser sintering and infiltration characteristics of resin-coated stainless steel powder
398. Selective laser sintering of aluminium- and titanium-based composites: Processing and characterisation
399. Selective laser sintering of customised medical implants using biocomposite materials
400. Selective laser sintering of SiC/polyamide composites
401. Selective laser sintering of single- and two-component metal powders
402. Selective laser sintering of single-phase powder Cr-V tool steel
403. Selective Laser Sintering: A Qualitative and Objective Approach
404. Selective laser sintering: Qualifying analysis of metal based powder systems for automotive applications
405. Selective laser system and materials sintering
406. Semi-Automated Micro Assembly for Rapid Prototyping of a One DOF Surgical Wrist
407. Sensing, modeling and control for laser-based additive manufacturing
408. Series production in miniature (Serienfertigung en miniature)
409. Sheet metal forming using polymer composite rapid prototype tooling
410. Shelling strategies to save time in a rapid tooling process
411. Significant factors on the dimensional accuracy of fused deposition modeling
412. Simulation and analysis of fracture in stereolithography QuickCast [trademark] patterns and in ceramic shells for investment casting
413. Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication
414. Sintered hydroxyapatite latticework for bone substitute
415. Sintering of commercially pure titanium powder with a Nd:YAG laser source
416. Sintering of freeformed maraging steel with boron additions
417. SIS - A new SFF method based on powder sintering
418. Smart move
419. Software casts a new light
420. Solid freeform encapsulation of 1-3-0 PZT composites
421. Solid freeform fabrication of alumina ceramic parts through a lost mould method
422. Solid freeform fabrication of ceramic PZT tapes: Mechanical and piezoelectric properties
423. Solid freeform fabrication of ceramics
424. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
425. Solid model reconstruction from engineering paper drawings using Genetic Algorithms
426. Some challenges of realistic flow simulations by unstructured grid CFD
427. Some recent developments in two- and three-dimensional laser forming for 'macro' and 'micro' applications
428. Speed metal
429. STEP-based direct slicing algorithm for rapid prototyping
430. Stereo-thermal-lithography: A new principle for rapid prototyping
431. Stereolithography and 3D micro-structuring of transparent materials by femtosecond laser irradiation
432. Stereolithography of lead zirconate titanate ceramics for MEMS applications
433. Stereolithography on silicon for microfluidics and microsensor packaging
434. Stereolithography tooling for silicone molding
435. Strain gauge analysis of laser forming
436. Stream line
437. Structure and properties of Ni-Ti intermetallic phases synthesized upon selective laser sintering: I. X-ray diffraction analysis
438. Structure and properties of the Ni-Ti intermetallic phases synthesized upon selective laser sintering: II. Structure and corrosion behavior
439. Studies of rapid soft tooling with conformal cooling channels for plastic injection moulding
440. Studies on numerical simulations of temperature field in selective laser sintering of polystyrene powders
441. Study of curing characteristics of photopolymer used in solid laser diode plotter rapid prototyping system
442. Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping
443. Study on joining process for laminated object manufacturing using metal as modeling materials
444. Study on rapid manufacturing metallic parts based on selective laser sintering process
445. Study on the interlaminar stress and warpage deformation in laminated object manufacturing
446. Study on the key technology of laminated object manufacturing for metal parts
447. Studying extinct animals using three-dimensional visualization, scanning, animation, and prototyping
448. Surface over-melt during laser polishing of indirect-SLS metal parts
449. Surface roughness determination of as-received indirect-SLS parts by means of line profilometry
450. Surface triangulation for polygonal models based on CAD data
451. Symposium Proceedings: Symposium LL, Rapid Prototyping Technologies
452. Symposium Proceedings: Symposium LL, Rapid Prototyping Technologies: Preface
453. T medical rapid prototyping in custom implant design for craniofacial reconstruction
454. Taking the waiting out of wanting more production
455. Tangible virtuality - Perceptions of computer-aided and physical modelling
456. Telemanufacturing of reverse engineered parts: A case study
457. The application of full-scale 3D anthropometric digital model system on breast reconstruction of plastic surgeries
458. The application of the brazing process in Selective Laser Sintering fabricated parts
459. The computation and measurement of residual stresses in laser deposited layers
460. The customized mandible substitute based on rapid prototyping
461. The development of distributed web-based rapid prototyping manufacturing system
462. The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
463. The importance of rapid tooling in product development
464. The influences of the material properties on ceramic micro-stereolithography
465. The micro fabrication using selective laser sintering micron metal powder
466. The next step in rapid prototyping
467. The rapid prototyping manufacturing industry
468. The rapid prototyping technologies
469. The rapid tooling testbed: A distributed design-for-manufacturing system
470. The structure of parts produced by stereolithography injection mould tools and the effect on part shrinkage
471. The use of a reconstructed three-dimensional solid model from CT to aid the surgical management of a total knee arthroplasty: A case study
472. The useful application of rapid technologies especially for automotive development
473. Thermal analysis of layer formation in a stepless rapid prototyping process
474. Thermal and residual stress modelling of the selective laser sintering process
475. Thermal modeling of selective area laser deposition (SALD) and SALD vapor infiltration of silicon carbide
476. Thermal performance of hybrid injection moulds with epoxy inserts
477. Thermo-viscoplasticity of powder composition under selective laser sintering
478. Thin wall titanium structural castings
479. Thin-wall calculation for layered manufacturing
480. Three dimensional MEMS with functionalized carbon nanotubes
481. Three-dimensi
482. Three-dimensional fabrication with laser sintering of metal powder - Toward solid free-form fabrication of sophisticated 3D parts
483. Three-dimensional image reconstructions of complex objects by an abrasive computed tomography apparatus
484. Three-dimensional laser scanning and reconstruction of ear canal impressions for optimal design of hearing aid shells
485. Three-dimensional nanostructuring by two-photon polymerization of hybrid materials
486. Three-dimensional techniques for capturing and building virtual models of complex objects for use in scientific and industrial applications, data archiving, and the entertainment industry
487. Tool path generation of multi-material assembly for rapid manufacture
488. Tool path-based deposition planning in fused deposition processes
489. Tooling specialists combine to offer design-to-commissioning service
490. Tracking control and reference trajectory generation in a LOM system
491. Two-photon laser micro-nano fabrication; Understanding from single-voxel level
492. Ultrasonic consolidation of aluminum tooling
493. Ultrasonic rapid manufacturing: Implementation and thermo-mechanical analysis
494. Use of SHS reaction between powder and droplets for coating, welding and freeform fabrication of intermetallics
495. Use of Stereolithography to Manufacture Critical-Sized 3D Biodegradable Scaffolds for Bone Ingrowth
496. Using stereolithography models in planning spinal surgery
497. Vacuum casting with room temperature vulcanising rubber and aluminium moulds for rapid manufacturing of quality parts: A comparative study
498. Versatile nanodeposition of dielectrics and metals by non-contact direct-write technology
499. Vision- based Process Control in Layered Manufacturing
500. Warm isostatic pressing (WIP'ing) of GS44 Si3N4 FDC parts for defect removal
501. Weld deposition-based rapid prototyping: A preliminary study
502. Cranioplasty with individual carbon fibre reinforced polymere (CFRP) medical grade implants based on CAD/CAM technique.
503. Integrated microsystems for controlled drug delivery.
504. An advanced approach for computer modeling and prototyping of the human tooth.
505. Hemifacial microsomia treated with mandibular lengthening using intraoral distractors. On precise indications [in French]
506. Refinement of facial reconstructive surgery by stereo-model planning.
507. Numerical description of selected endo- and ectocranial dimensions in Homo sapiens and the three Homo heidelbergensis: Kabwe, Atapuerca and Petralona.
508. Vascularized free bone grafts for maxillary and mandibular reconstruction.
509. The manufacture of pelvic mirror physical model using rapid prototyping [in Chinese]
510. Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication.
511. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends.
512. Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties.
513. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs.
514. Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition.
515. Cell micropatterning using photopolymerization with a liquid crystal device commercial projector.
516. The use of hybrid stereolithographic models for the planning of complex craniofacial procedures.
517. Fast generation of stereolithographic models.
518. Computer-aided tissue engineering: overview, scope and challenges.
519. Computer-aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds.
520. Stereolithographic modelling and radiation dosage.
521. Three-dimensional computed tomography imaging in craniofacial surgery: morphological study and clinical applications.
522. The use of stereolithography for an unusual patellofemoral disorder.
523. Recent development on computer aided tissue engineering--a review.
524. Can rapid prototyping ever become a routine feature in general dental practice?
525. Clinical aspects and strategy for biomaterial engineering of an auricle based on three-dimensional stereolithography.
526. Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds.
527. A stent fabricated on a selectively colored stereolithographic model for placement of orthodontic mini-implants.
528. Accuracy of implant placement with a stereolithographic surgical guide.
529. Computer-assisted implant placement. A case report: treatment of the mandible.
530. Robot-assisted placement of craniofacial implants.
531. Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study.
532. Stereolithographic surgical templates for placement of dental implants in complex cases.
533. Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 1: Design and fabrication of prosthesis replicas.
534. Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2: Development of molding techniques for casting prosthetic parts.
535. The Sophia Anatomical Infant Nose-Throat (Saint) model: a valuable tool to study aerosol deposition in infants.
536. Liquid acrylate-endcapped biodegradable poly(epsilon-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs.
537. Engineered cellular response to scaffold architecture in a rabbit trephine defect.
538. Performance of degradable composite bone repair products made via three-dimensional fabrication techniques.
539. In vivo efficacy of bone-marrow-coated polycaprolactone scaffolds for the reconstruction of orbital defects in the pig.
540. Performance of hydroxyapatite bone repair scaffolds created via three-dimensional fabrication techniques.
541. Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth.
542. Evaluation of thermal- and photo-crosslinked biodegradable poly(propylene fumarate)-based networks.
543. Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research.
544. Rapid prototyping: the future of trauma surgery?
545. The accuracy of stereolithography in planning craniofacial bone replacement.
546. The application of rapid prototyping techniques in cranial reconstruction and preoperative planning in neurosurgery.
547. Re: The accuracy of stereolithography in planning craniofacial bone replacement.
548. New internal Le Fort I distractor for the treatment of midface hypoplasia.
549. Development of a new three-dimensional cranial imaging system.
550. Application of rapid prototyping to operative dentistry curriculum.
551. Computed tomography as a diagnostic aid for extracanal invasive resorption.
552. Cerebrovascular stereolithographic biomodeling for aneurysm surgery. Technical note.
553. The evolution of multiplanar diagnostic imaging: predictable transfer of preoperative analysis to the surgical site.
554. The precision of computer-generated surgical splints.
555. The design and fabrication of fiber-reinforced implant prostheses.
556. Preformed acrylic cranial implants using fused deposition modeling: a clinical report.
557. Optical modeling of extraoral defects.
558. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying.
559. The use of a reconstructed three-dimensional solid model from CT to aid the surgical management of a total knee arthroplasty: a case study.
560. Delayed minimally invasive cranioplasty.
561. Stereolithography: neurosurgical and medical implications.
562. Three-dimensional craniofacial reconstruction imaging.
563. Validation of Align Technology's Treat III digital model superimposition tool and its case application.
564. New photoactivators for multiphoton excited three-dimensional submicron cross-linking of proteins: bovine serum albumin and type 1 collagen.
565. Effect of distraction osteogenesis of the mandible on upper airway volume and resistance in children with micrognathia.
566. Structural integrity of polypropylene prosthetic sockets manufactured using the polymer deposition technique.
567. Characterization of microfeatures in selective laser sintered drug delivery devices.
568. Rapid manufacturing techniques in the development of an axial blood pump impeller.
569. Stereolithography as an additive technique in dentistry [in French, German]
570. Rapid manufacturing of aluminum components.
571. Scoliosis in an Orangutan.
572. In vitro measurement of fluid-induced wall shear stress in unruptured cerebral aneurysms harboring blebs.
573. Visualization of the temporal bone of the Chinese Visible Human.
574. Bioartificial liver process monitoring and control systems with integrated systems capability.
575. Scaffold design and in vitro study of osteochondral coculture in a three-dimensional porous polycaprolactone scaffold fabricated by fused deposition modeling.
576. Repair of calvarial defects with customised tissue-engineered bone grafts II. Evaluation of cellular efficiency and efficacy in vivo.
577. Organ printing: computer-aided jet-based 3D tissue engineering.
578. Feasibility of tunable MEMS photonic crystal devices.
579. [Not Available] [in German]
580. Perspective of skull reparative surgery using three-dimensional computed tomography and stereolithography [in Russian]
581. Using laser scanning to 3-D reconstruct an ear model [in Chinese]
582. Market growth for UV and EB forecast at 6%-9% per year. (Market Trends).
583. Why advanced manufacturing matters to the United States.
584. Trimming the size of rapid protoyping and CAD files.(China)
585. Tools, Dies, and Industrial Molds. (AMT Market Forecast).
586. Applying subtractive technology to rapid prototyping.
587. Developing a data exchange for layered manufacturing.
588. Giving designers instant access to rapid prototyping.
589. Producing more flexible materials for stereolithography.
590. Improving laser-based additive manufacturing.(Solid Freeform Manufacturing)
591. Rapid prototyping and tooling of injection molds.
592. Getting to grips with selective laser sintering.(innovations in selective laser sintering (SLS))
593. Rapid prototyping. (AMT Market Forecast).
594. What's new in electroforming?
595. Developing a system for direct metal laser-melting.(partnership between Trumpf and EOS)
596. Commercializing filled liquid prototyping materials.
597. Improving rapid metal production costs and quality.
598. Using high-performance PPSF plastic for rapid prototyping.
599. Launching an advanced digital automotive manufacturing center.
600. Optimizing laser movement in layered manufacturing.
601. Getting 3D printing done faster.
602. Providing instant competitive quotes for rapid prototyping.
603. Overnight rapid prototyping service launched.
604. Algorithms speed-edit and fix STL files.
605. Advances in using metals and nylon for laser sintering.
606. Reverse engineering to manufacture complex objects.
607. Rapid prototyping of aluminum by arc welding.
608. Using selective laser sintering to make parts on demand.
609. Developing more mobile robots using SDM.
610. Using direct metal casting for rapid prototyping.
611. Using rapid manufacturing on the battlefield.
612. Rapid technique promises aluminum parts revolution.(Australia)
613. 3D Systems Reverse Engineers Motorcycle Fairing in Less Than Three Days.
614. 3D Systems' New Bluestone Engineered Composite to Provide Exceptional Stiffness, Strength.
615. ProtoComposites and Nanotechnology for Stereolithography Open New Applications for the Rapid Prototyping Industry.
616. Filled liquid prototyping materials (composites) for a broader application range emerge on the near horizon.
617. 3D printers could become industrial dynamos.
618. Stratasys adds high-performance ppsf plastic for rapid prototyping.
619. 3D Systems Announces the Availability of LaserForm A6 Steel for the SLS System.
620. New plastics molding process dramatically reduces prototyping and production costs and speeds time to market.
621. tons of technology: the A380, which takes to the skies in three years, will not only be the largest civil transport ever built, it also will be the most advanced. (Lange Transports).(Airbus A380)
622. On-line access to rapid production. (Company News).
623. Rapid prototyping firm shines in taillight project. (case books).
624. Full speed ahead: innovation remains RP/T industry's most important product. (Technology update: rapid prototyping/tooling).
625. Prototyping in nylon. (News).(MCP Systems)(Brief Article)
626. Power cord/connector critical to redesign: router's detachable power cord is result of tri-collaboration.(Connectors & Cords)
627. FDM Vantage[TM] rapid prototyping system.(Equipment)
628. Taking tooling to the edge. (Medical Devices).
629. Power routing.(Power Tools)
630. Designers get more information earlier and faster via affordable rapid-prototyping tools.
631. CNC state of mind: CNC and other manufacturing technologies allow for a smooth transition from 3-D computer modeling to finished product. (Tech).
632. A model of the future: fabbers and 3-D printers bring the scale model out of the wood shop and into the digital era.(tech)
633. Rapid tooling the driving force.
634. Filled resin improves prototyping performance.
635. New bluestone engineered composite from 3D Systems provides exceptional stiffness and strength.
636. DC Design: Prince of Prototypes.
637. Need a new bone? We'll print it for you.
638. Prototyping all the way to perfection.
639. Stratasys adds high-performance PPSF plastic.
640. All things big and tough.
641.