|
|
|
|
|
|
Four discreet chambers: one 50" x 14" x 6" long gun chamber, two 12" x 18" x 18" cyanoacrylate chambers and one 24" x 18" x 18" cyanoacrylate chamber.
Each chamber has internal quartz lighting.
The glass in chamber doors are tempered glass. Doors will seal to prevent CA vapors from escaping.
Each chamber has its own switch controlled heated CA fuming system with enhanced 2 ½" diameter CA heater surface.
Coaxial dispensing of water and CA in each chamber allows the vapors to mix in free air.
Each chamber has provision for external exhaust through a series of ports. The standard primary exhaust port will be 4" in diameter on the left side. Alternate location may be requested upon ordering. A 24" clearance is necessary on each side of the equipment to operate the individual vent assemblies for the fuming compartments.
The overall cabinet is treated aluminum with a powder coated beige finish.
Power requirements: 115V, 20 amps, U ground GFI receptacle.
You will require an extractor fan supplied by others with outside exhaust @ 640 cubic feet per minute.
Electrical connections and special ducting will be the responsibility of the installing contractor.
|
|
|
|
|
|