Basic Soundboard Product includes highest quality Sitka or Eastern White spruce (or similar Engelmann varieties) panels and ribs. Panel is diaphramized (tapered -- this is important) at selected areas. Ribs are crowned, and all is pressed in crowned presses at 5% EMC. Bridges are recapped (in standard three-piece Steinway style) for extra height. When dry they are side-routed, scraped and sanded, and ready to plane to target depth and final drilling and notching. Bridges are not glued to the new board. There is an additional charge for gluing bridges to new board (see below).

Piano Size:  Cost for Basic Soundboard Product:

Up to 6’          $1,750

6’1” to 8+         2,015

9'                        2,670

 

Special Notes:

 

Steinway B                           $2,150

Mason & Hamlin BB            2,200

 

Add $75 for three bridge belly (separate low tenor bridge)

 

Add $250 to above costs if you want us to locate and glue the bridges onto the new board. This work involves making a full size pattern (or modifying yours), locating the original bridges relative to the old board and carefully transferring the data and datum information to the new board, locating and drilling out rib dowel holes, temporarily pinning bridges to the new board, gluing bridges on, and later following with dowels through the ribs and into the bridges. In addition, most high-end boards have attached acoustic blocks and dowels, along with soundboard buttons and screws. Finally the entire bottom is re-sanded and finished with a wash coat of shellac. If you have affixed bridges to a new board you understand the processes.

______________________________________________________

Pattern-Only Soundboard Order

We can build a new soundboard based on your posterboard or Mylar (plastic) pattern, and possibly a few measurements. Follow our instructions on “pattern making” in the Soundboard Manual. Then remove the old board, clean the rim, and place the pattern on the rim in order to locate notch and rim information. Using this system we strongly suggest new bridge caps. Please contact us for more info on this.

_______________________________________________________

Bridge Services

1) Send us your bridges for new caps. Maple caps are of three-piece Steinway style, made too-tall, are side-routed, scraped and sanded, and ready to plane to target depth and final drilling and notching. (This service is routine if we are making a new board for you).

2) Completed bridge caps (installed on new board, notched and pinned)

For size PIANO up to and including:

Piano Size up to:       Caps Only      Complete
6'4" ________________$500 ______$1,000   

7’ 4”_________________625_______ 1,250   

9’ __________________ 750_______ 1,500

Take one-half off on Caps-Only prices if you pull pins and install shoe pegs in all holes. (Call Pianotek for shoe pegs). Also, returned bridge caps will be glued on and side-routed, but not scraped and sanded.

Note:  Certain boards, for example some Chickerings or Bechsteins, or other odd and 
 
unusual types, will have to be finally quoted on an individual basis.  But, more or less,  they will 
 
fall roughly into the above framework of prices. 
 
SHIPPING charges are additional, and are paid by customer when old board is shipped 
 
(shipped "prepaid").  We will ship new soundboard "collect" to you.  Call your nearest  interstate 
 
trucking company  and ask how much it costs to ship a crate which weighs about 150 pounds 
 
to Long Beach, California.  To find the best deal we suggest you go to the free online service
 
http://www.freightquote.com/Rating.asp and fill out the form online. FreightQuote will supply you
 
with a list of shippers for you to consider. 
 
Remember your crate width dimension should be 6 to 8 inches (8 inches is better).
 
 
 
Ship crates to:
 
 
 
P&O Movers       
 
2835 Gundry Ave 
 
Signal Hill, CA 90755-1812
 
 
 
Work:     800-427-6353
 
Fax:        562-989-7556
 
                               
 
PLEASE DO NOT SHIP YOUR CRATE WITHOUT PRIOR NOTIFICATION
 
PAYMENT TERMS
 
A $1,000 materials-deposit is required in order for us to secure and process wood materials, 
 
and to confirm you in our shop schedule.  Balance is due before we ship new board to you.
 
When work commences, your new board will be ready within 10 days (longer w/ new bridges).
 
Current Price List @ December 2005 PRICES SUBJECT TO CHANGE  Nick Gravagne, RPT
 
 
 
Last Published Price List @ July 2004
Former Published Price List @ January 2001. 
 
Copyright:  Nick Gravagne -- May 2000                              
Home