The Saloon is built out of balsa wood. The signs come from Gary Chalk's article in issue 160 of Wargames Illustrated and from the MicroTactix Vulture Gulch set. Some of the other images have been copied from several web sites, reduced to an appropriate size, and printed on a color laser printer (I don't recommend an ink-jet, as the colors are too likely to run.). The windows, doors, and banisters are 1/4 inch plastic pieces purchased at a dollhouse store.
My big mistake on this building was thinning the paint with water before applying it to the balsa. After using the plywood from the clementine boxes, I did not expect any problems. The balsa, however, is thinner and softer and, as a result, warped. This time, I used some specifically shaped balsa pieces for the exterior rear corners.
The interior of the saloon is the most complex I have attempted. The upper floor is based on thin cardboard from a cereal box with boards drawn on with a thin pen. The railing is from a 1/4 inch scale material purchased at a dollhouse store. The three rooms, while too small for real use, are spaced to match the rear windows. The chandelier is made of two pieces of sprue painted and glued together. If I had it to do again, I think I would find some fishing line to use instead of thread (It is taped to the underside of the floor).
The second floor is designed to be removed, exposing the saloon beneath. Everything in the front room is scratch built. The bar's mirror is a piece of aluminum foil and the shelves, bar, stairs, and piano are all built from balsa. The interior pictues are laser printed art from the internet that has been reduced to a good size. The glasses and bottles are pieces of the ink tube of a pen that have been cleaned, cut, and glued to the bar. The stove and furniture in the kitchen are from (unsuprisingly) a 1/4 inch scale kitchen set, purchased at my local dollhouse store. The bathtub, a less than successful scratch-build, provides patrons with a place to wash.
Return to Main Deadlands page.
