INSTALLATION
& CONTROLS:
Installation
These mounting brackets are shipped mounted in reverse. Please
turn them around as shown to mount the audio monitor to the wall.
Remove the three nuts to take the plate off and them replace them
to put it back on the traffic light.
Controls
Traffic Audio Monitor Volume
And Sensitivity Adjustment
The traffic monitor has two adjustment pots/knobs,
one inside the yellow light and one outside the yellow light next
to the sounder. This is the inside pot. Turn it clockwise to make
the sounder louder and counterclockwise to make it softer. The
knob adjusts for one almost full turn so turn it to get the volume
desired.
This is the outside pot. Turn it clockwise to increase the sensitivity
of the traffic light - less crowd noise turns the light to red
sooner. Turn it counter clockwise to decrease the sensitivity
- more crowd noise is required to turn the light to yellow
and then to
red. The knob adjusts for five full turns so keep turning to get
the sensitivity desired.
|
|
