1998 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Hugh B. Denham (a), Joe Cesarano III (a), Bruce H. King (a), Paul Calvert (b), (a) Sandia National Laboratories, (b) University of Arizona
Source Solid Freeform Fabrication Proceedings, 1998, pp 589-596
Abstract Direct fabrication of alumina parts by robocasting was completed. This method is based on three-dimensional deposition of binderless aqueous alumina slurries. Parts were made with different deposition paths and mechanical testing performed to determine the effects of bead alignment. Properties were also compared to alumina processed more traditionally. (Auth abstract) [References: 1]
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu