1998 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author T. D. Stewart, K. W. Dalgamo, TH.C. Childs, J. Perkins, The University of Leeds
Source Solid Freeform Fabrication Proceedings, 1998, pp 443-450
Abstract This paper reports the results of a study into the strength of the DTM RapidSteel 1.0 material. Elastic modulus and strength of the metal/copper composite material was investigated as a function of the distance from the point of copper infiltration, the furnace cycle duration, and the furnace type. The microstructure of the RapidSteel material was also examined in an attempt to understand the science behind the infiltration process. The results have implications for the design of tools to be made using the RapidTool process in situations where the tool will be used as a production tool, rather than a prototype tool. (Auth abstract) [References: 5]
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu