1998 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Zbigniew M. Bzymek (a), Leon L. Shaw (a), Wojciech Marks (b), (a) University of Connecticut, (b) Inst. of Fundamental Technical Problems-PAS
Source Solid Freeform Fabrication Proceedings, 1998, pp 399-406
Abstract This paper addresses the need to conduct theoretical work concerning an economical way of Solid Freeform Fabrication rendering by using selective Area Laser Deposition (SALD). The part in SALD rendering process is formed layer by layer that, in turn, is composed of stripes of material produced in the path of a laser. There are three situations in which such a stripe can be rendered: a) alone, b) with one neighbor on one side, and c) with neighbors on both sides. Residual thermal stresses in the part are expected to be affected by how a stripe is rendered. Furthermore, the residual thermal stress and the mechanical property of the part are also dictated by other processing variables such as laser scanning pattern, laser input power, scanning speed, scanning spacing, deposition temperature, gas precursor pressure, intrinsic thermal conductivity and mechanical properties of the rendered material. A theoretical approach is proposed to address the minimization of residual thermal stresses and rendering times and the maximization of the strength of the part. It is proposed that such multiple optimizations that are dictated by many decision variables can be solved by minimizing and/or maximizing object functions depending on the design criteria for each attribute of the rendered part. (Auth abstract) [References: 8]
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu