1995 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author T. Pintat (a), M. Greul (a), M. Greulich (a), C. Wilkening (b), (a) Fraunhofer - IFAM, (b) EOS GmbH
Source Solid Freeform Fabrication Proceedings, 1995, pp 72-79
Abstract The work shows the mechanical properties of direct laser-sintered metal parts. The parts were tested after sintering and after an infiltration. Furthermore the accuracy of the parts was measured. Micrographs of the parts show the microstructure of the copper-nickel-tin alloy. The achievable complexity of parts is demonstrated by examples. An overview of future activities is given. (Auth abstract) [References: 3]
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu