1995 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Suresh Jayanthi., Bronson Hokuf, John Lawton DuPont Somos (TM) Materials Group
Source Solid Freeform Fabrication Proceedings, 1995, pp 107-117
Abstract Post cure methods have always been a critical issue for most of the currently used stereolithography photopolymers. Different post cure conditions can be used to enhance the mechanical and physical properties of the stereolithography models. To better understand the influence of post cure conditions on these material properties, an experimental study evaluating various post cure conditions has been conducted. Ultra-violet, thermal and ultra-sound post curing techniques are investigated and a comparative study is made for one epoxy based photopolymer - SOMOS (TM) 6100. Similar results should be attainable for other epoxy based photopolymers. (Auth abstract) [No References]
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu