1993 Solid Freeform Fabrication Proceedings

Use the browser's BACK button to return to the SEARCH RESULTS pages.

1993 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.

Mom's Search Page | Next | Contents

1993 Solid Freeform Fabrication Proceedings - Table of Contents

1. Material Issues in Layered Forming
2. StereoLithography Epoxy Resin Development: Accuracy and Dimensional Stability
3. Vibratory Finishing of StereoLithography Parts
4. Structural Ceramic Components by 3D Printing
5. Direct Laser Sintering of Metals
6. Solid Freebody Forming of Ceramics From Polymerizable Slurry
7. Development of Nanocomposites for Solid Freeform Fabrication
8. Part Fabrication Using Laser Machining and Welding
9. Picoliter Solder Droplet Dispensing
10. Control Parameters and Material Selection Criteria for Rapid Prototyping Systems
11. Reducing or Eliminating Curl on Wax Parts Produced in the Sinterstation (TM) 2000 System
12. Computer Aspects of Solid Freeform Fabrication: Geometry, Process Control, and Design
13. Virtual Reality and Rapid Prototyping: Conflicting or Complementary?
14. Optimization of 2D CT Data Sets for Three-Dimensional Craniofacial Imaging and Modeling
15. Some Efficient Procedures for Correcting Triangulated Models
16. Robust Prototyping
17. Simulation of Solid Freeform Fabrication
18. Automated 4 Axis Adaptive Scanning With the Digibotics Laser Digitizer
19. StereoLithography 1993: QuickCast (TM)
20. FFF at Ford Motor Company
21. An Experimental Study of the Parameters Affecting Curl in Parts Created Using Stereolithography
22. Homogenization Design and Layered Manufacturing of a Lower Control Arm in Project MAXWELL
23. An Evaluation of the Mechanical Behavior of Bronze-NI Composites Produced by Selective Laser Sintering
24. Silicon Carbide Preforms for Metal Infiltration by Selective Laser Sintering (TM) of Polymer Encapsulated Powders
25. Fabrication of Ceramic and Metal Matrix Composites From Selective Laser Sintered Ceramic Preforms
26. Powder Layer Position Accuracy in Powder-Based Rapid Prototyping
27. The Physics of Digital Microfabrication,with Molten Microdrops
28. Material and Process Parameters That Affect Accuracy in Stereolithography
29. Thermal Analysis and Modeling of Steady-State Rod Growth During Gas-Phase Solid Freeform Fabrication
30. Potential Application of Solid Freeform Fabrication (SFF) Process in Ceracon P/M Forging
31. Machine Vision for Rapid Geometric Modeling
32. Strategy for Composite Development in Rapid Prototyping
33. Direct Generation of Contour Files from Constructive Solid Geometry Representations
34. Indirect Metal Composite Part Manufacture Using the SLS Process
35. Solid Freeform Fabrication of Silicon Carbide Shapes by Selective Laser Reaction Sintering (SLRS)
36. Supersolidus Liquid Phase Selective Laser Sintering of Prealloyed Bronze Powder
37. Selective Area Laser Deposition of Silicon Carbide
38. Drying of Colloidal Binder Infiltrated Ceramic Green Parts Produced by Selective Laser Sintering (TM)
39. Synthesis, Selective Laser Sintering and Infiltration of High Tc, Dual Phase Ag-YBa2Cu3O7-x Superconductor Composites
40. Selective Laser Sintering of AL2O3
41. Laser Sintering Model for Composite Materials
42. Measurement of the Thermal Conductivity of Powders by Two Different Methods
43. Selective Laser Sintering of Bioceramic Materials for Implants

Mom's Search Page | Next | Contents

Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium

or contact:

The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu