2003 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Richard Chartoff, Brian McMorrow, and Pierre Lucas Department of Material Science and Engineering University of Arizona; Arizona Materials Laboratory Tucson, Arizona 85712, USA
Source Solid Freeform Fabrication Proceedings, 2003, pp 385-391.
Abstract A research program has been initiated to develop a Solid Freeform Fabrication (SFF) technology for combining nanosized particulate or fiber reinforcements with a photocurable thermoset matrix resin in order to produce functional graded composites. The composites that are being studied initially are optical components filled with nano-phase ceramic particles that form gradient refractive index lenses (GRIN)
The Solid Freeform Fabrication (SFF) method employs an ink-jet deposition (IJD) process to form the composites. The IJD process has the advantage of incorporating nano-reinforcements into a low viscosity matrix resin that is relatively easy to process and rapidly photocures to produce functional polymeric parts. It also has the advantage that major modifications to the basic SFF processing methodology are not necessary. The emphasis in the program is on demonstrating the feasibility of this approach for fabrication of gradient refractive index lenses (GRIN) , which are flat instead of the traditional spherical lens geometry. As a result these lenses will be less costly to produce than conventional curved lenses. SFF is an ideal technique for meeting the needs of GRIN lens fabrication because changes in composition can be made from layer to layer and even within each layer, allowing for the introduction of compositional and structural gradients. Thus it has the potential for creating the spatial material distributions required for designing computer optimized, custom made GRIN lenses. Integral to the SFF process are computer design procedures that specify the exact material deposition patterns that need to be employed in order to optimize the performance of the GRIN lens.
The optical nano-composites will serve as a model system that we will use to work out the many challenges for implementing a viable SFF polymer composites technology. We then will make use of the information obtained and lessons learned from the work on optical composites and extend the development to structural composites that incorporate nano-particulate clays and carbon nanofibers. (Auth abstract) [References: 31] XX
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu