2003 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Rajeev Dwivedi, Radovan Kovacevic Research Center for advanced Manufacturing Southern Methodist University, 1500 International Parkway Suite # 100, Richardson, TX, 75081
Source Solid Freeform Fabrication Proceedings, 2003, pp 1-12.
Abstract This paper describes a new approach for rapid prototyping based on volumetric skeletonization. Contrary to most of the popular techniques for Solid Freeform Fabrication (SSF) based on 2-1/2 -axis layering as planar slices, this approach suggests the growth of the component along all three coordinate axes. While this approach offers many advantages in terms of the elimination of the support structures for the reduction of the staircase effects and the elimination of various post processes for the functional parts, this approach also offers challenges towards process planning. For various complicated shapes it may not be possible to generate the required shape using this approach; however, a hybrid approach which also incorporates the deposition by layers, may offer an optimum solution. Preliminary results are based on the successful laser-based additive deposition along multiple g-vectors. The material properties and the problems of possible porosities are still to be investigated. Advantages, process planning, applications, experimental results, and the challenges of this new method are the subject of this paper. (Auth abstract) [References: 20] XX
Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium
or contact:
The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu