2002 Solid Freeform Fabrication Proceedings

Use the browser's BACK button to return to the SEARCH RESULTS pages.

2002 / Solid Freeform Fabrication Proceedings
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.

Mom's Search Page | Next | Contents

2002 Solid Freeform Fabrication Proceedings - Table of Contents

1. Selective Laser Sintering of Bioactive Glass-Ceramics
2. Computational Design, Freeform Fabrication and Testing of Nylon-6 Tissue Engineering Scaffolds
3. Application of SFF To Preoperative Planning and Surgical Rehearsal for Treatment of Limb Deformities In Dogs.
4. Layered Composite Model for Design and Fabrication of Bone Replacement
5. Rapid Prototyping (through SLS) as Visualisation Aids for Architectural Use.
6. The Freeform Fabrication of Structurally Optimized and Complexly-Shaped Metal Tubular Components
7. Laser Aided Part Repair- A Review
8. Application of Laser-Based Additive Manufacturing to Production of Tools for Friction Stir Welding
9. The Effect of Layer Thickness on Ejection Forces for Injection Moulded Parts Made Using DMLS Tools
10. Studies on Slurry Extrusion for Dental Restoration
11. Application of solid freeform fabrication processes for injection molding low production quantities: process parameters and ejection force requirements for SLS inserts
12. Multi-material and Advanced Geometry Deposition via Laser Chemical Vapor Deposition
13. Selective Laser Sintered CastForm TM Polystyrene with Controlled Porosity and its Infiltration Characteristics by Red Wax
14. Effects of Cryogenic Aging on a Rapid Prototyped (RP) Polymer
15. Fabrication of Titanium Aluminide Matrix Composites by Laser Engineered Net Shaping
16. Solid Freeform Fabrication of Ceramic Parts From Filler Loaded Preceramic Polymers
17. Prediction of Microstructure in Laser Deposition of Titanium Alloys
18. Real-time measurement of temperature for control of laser surface modification process
19. Investigation of the Liquid Phase Sintering of Size Range Composed Powder for SLS Application
20. Powder Metallurgy of M2 High-speed Steel for Rapid Tooling Applications
21. Mechanical Properties of Pure Titanium Models Processed by Selective Laser Melting
22. Direct Selective Laser Sintering of Superalloys
23. An Investigation of the Control Parameters for Aluminium 3003 under Ultrasonic Consolidation
24. Single-layer Deposits of Nickel Base Superalloy by means of Selective Laser Melting
25. The SLS characteristics of 1.8wt% clay nanoparticle/Nylon 6 composite
26. Functionally Graded Copper – Steel Using Laser Engineered Net Shaping (TM) Process
27. Development of Reverse Engineering System for Machine Engineering Using 3D Bit-map Data
28. Parts Design and Manufacturing Process Support System Based on Stereolithography Manufacturing Knowledge Database
29. XML Representation and Process Algorithm for Layered Manufacturing of Heterogeneous Objects
30. Object–Oriented Modeling and Fault Detection of a Powder Feeder for a Laser Metal Deposition System
31. Advances in Functional Testing With SFF Parts
32. Investigation into the mechanical properties of Rapid Manufacturing materials
33. Solid Freeform Fabrication and Parametric Engineering
34. Heterogeneous Material Modeling with Distance Fields
35. Issues in Process Planning for Laser Chemical Vapor Deposition
36. Scaling Laws for Melting and Resolidification in Direct Selective Laser Sintering of Metals
37. Effect of Volume of Heat Sink on Process and Physical Properties of Parts Built by Welding Based SFF
38. Finite Element Analysis of Residual Stresses and Deformations in Direct Metal SLS Process
39. Analysis Of The Influence Of Viscoelasticity in Curl Development in SLS
40. A Three Dimensional Fem-Simulation Of The Selective Laser Sintering Process With Locally Refined Meshes and Non-Constant Thermal Conductivity.
41. Heat Transfer Manipulation for Precision Droplet Manufacturing: Simulation and Experiment
42. Evaluation of PROMETAL technique for Application to Dies for Short Run Forgings
43. Analyzing the DMLS-Process By a Macroscopic FE-Model
44. Preheating Effects on Multiple Material Laser Densification
45. Investigation of Bond Formation in FDM Process
46. The Development of an Integrated Graphical SLS Process Control Interface
47. Visualization of Surface Accuracy for Virtual Prototyping
48. Development of 3D Bit-Map-Based CAD and Its Application To Hydraulic Pump Model Fabrication
49. Finite Element Thermal Analysis of Three Dimensionally Printed (3DP TM) Metal Matrix Composites
50. SIS – A New SFF Method Based on Powder Sintering
51. The Characterization of The Performance of a New Powder Feeder for Laser Based Additive Manufacturing
52. Development of a Prototype Low-Voltage Electron Beam Freeform Fabrication System
53. Recent Developments in Metal Laminated Tooling by Multiple Laser Processing
54. Three-Dimensional Fabrication of Metallic Parts and Molds Using Hybrid Process of Powder Layer Compaction and Milling
55. Characterization of 2219 Aluminum Produced by Electron Beam Freeform Fabrication
56. Laser-Based Meso/Micro Rapid Manufacturing System
57. Adhesive Bonding of Sheet for Laminated Metal Tooling
58. The Study of On-line Waste Material Removal Procedures for Bridge Laminated Object Manufacturing (LOM) Process
59. System Integration and Real–Time Control Architecture of a Laser Aided Manufacturing Process
60. Morphology of Direct SLS-Processed Stainless Steel Layers
61. Selective Laser Sintering of SiC/Polyamide Matrix Composites
62. Characterization of Selective Laser Sintering Materials To Determine Process Stability T.J. Gornet, K.R. Davis, Dr. T.L. Starr, K.M. Mulloy, Rapid Prototyping Center, J.B. Speed Engineering School, University of Louisville, Vogt Building, Room 101, Louisville, KY 40292
63. Surface Characterization of Laser Polished Indirect-SLS Parts
64. Investigation of Part Accuracy and Surface Roughness in Rapid Freeze Prototyping Based Investment Casting
65. Stereolithography Process Resolution
66. Statistical Model of Laser Surface Finishing Using Design of Experiments
67. An Integrated Approach to Finish Machining of RP Parts
68. Study of the Heating-and-Pressing Separation Process of Laminated Object Manufacturing (LOM)
69. Design of Thermal Environment in Plastic Injection Mold Based on Evaluation of Resin Cooling Uniformity
70. Experimental And Numerical Study on the Flow of Fine Powders From Small-Scale Hoppers Applied To SLS Multi-Material Deposition – Part I
71. Motion Planning for Cladding Operations in a 5-axis LENS (TM) Machine
72. A Study on Effects of Process Parameters in Rapid Freeze Prototyping

Mom's Search Page | Next | Contents

Solid Freeform Fabrication Proceedings can be obtained from: The Solid Freeform Fabrication Symposium

or contact:

The University of Texas at Austin
Laboratory for Freeform Fabrication / Texas Materials Institute
Mechanical Engineering Dept.
c/o The Solid Freeform Fabrication Symposium
MC C2200
Austin, TX 78712-1063 USA
512-471-3026; 512-471-7681 FX; Email: sffsymp@uts.cc.utexas.edu