1998 / DB reference year
PREV and NEXT link to numerically adjacent references for this YEAR.
CONTENTS links to the title list for this YEAR's references.
Author Walczyk, D F. Hardt, D E. Institution Rensselaer Polytechnic Inst, Troy, NY, USA
Source Journal of Manufacturing Science & Engineering, Transactions of the ASME. v 120 n 4 Nov 1998. p 746-754.
Abstract Sheet metal forming dies constructed of laminations offer advantages over more conventional tooling fabrication methods (e.g. CNC-machining) in terms of tooling accessibility, reduced limitations on die geometry and faster fabrication with harder die materials. Furthermore, the recently introduced Profiled Edge Lamination (PEL) tooling method improves upon other lamination-based tooling methods. Adoption of this promising rapid tooling method by industry is being hindered by the lack of formal analysis, design principles, and manufacturing requirements needed to construct dies in such a manner. Therefore, the propensity for delamination of the die is discussed and preventive measures are suggested. The basic machining instructions, i.e., an array of points and directional vectors for each lamination, are outlined for both compound and planar profiled-edge bevels. Laser, AWJ and flute-edge endmilling are experimentally identified as the most promising methods for machining bevels. Development of a stand-alone PEL fabrication machine is suggested over retrofitting commercially-available 5-axis machines. Finally, the general procedure for creating PEL dies is implemented in the construction of a matched set of sheet metal forming tools. These tools are used to successfully stamp a sheet metal part out of draw-quality steel. (Auth abstract) [References: 20] XX