The Ott Cloud Chaser

This reduced plan should  will fit on a standard sized sheet of paper. If you have Netscape do a right click on the plan, click [View Image] and then , with the printer set with no margins, then click [Print]. Something similar should work for you folks in thralldom to Bill Gates-

On the original the ribs were made of bamboo. I use molded wood ones.1/16 X 3/32. I support the stressed ones with a straight stick of 1/16 square running under the curved rib from the leading to the trailing edge. I'm sure ordinary sheet ribs would work.

Some of the dimensions are  illegible. The span is 28" and the length of the motorsticks is 30". You should be able to work it out from there..

The dihedral on the canard isn't shown. 2" works for me.
 
 

A frame 1/8 x 3/6 x30 inches light balsa
Braces 1/16 x 1/4 inches bamboo
Wing Spars  1/8 x14 x30 inches  hard balsa
Canard Spars   1/8 x 3/16 x 12 inches balsa

 


 

HOME (CLICK)
TWIN PUSHER INTRO (CLICK)
TWIN PUSHER PLAN PAGE (CLICK)
 

dannysoar2