This may also apply to codes 206 and 207.
All code numbers are access by hitting the MAGIC key, then typing in the three digit code.
| CODE |
|
|
| 004 | SP | Sets tape speed to SP |
| 005 | SVHS | Sets tape record mode to Super VHS |
| 007 | ? | Causes display in tuner mode to briefly blink. |
| 009 | VHS | Sets tape mode to standard VHS |
| 011 | ? | Causes display in tuner mode to briefly blink. |
| 013 | TimeScan OFF | Turns TimeScan audio OFF (there appears to be no ON code) |
| 020 | OK | In most cases, the ENTER/OSD code can be used instead. |
| 021 | Display | Rotates display on VCR panel between channel, tape position, tape remaining. On screen COUNT displays remaining if display shows remaining. |
| 022 | Enter/OSD | |
| 024 | Program Check | Displays all programs stored, then steps through each program. |
| 025 | Cancel/Clear | Cancels a displayed program, or resets the counter to 00:00:00 |
| 028 | Fwd 3X | (Shuttle) Plays forward 3X |
| 029 | Fwd 1/8 | (Shuttle) Plays forward 1/8X |
| 030 | Fwd Fast | (Shuttle) Plays forward fast (21X?) |
| 031 | Fwd 1X | (Shuttle) Plays at normal speed |
| 032 | Fwd Fast | (Shuttle) Plays forward fast (21X?) |
| 033 | Fwd 1/6 | (Shuttle) Plays forward 1/6X |
| 034 | Fwd 1/30 | (Shuttle) Plays forward 1/30X |
| 035 | Fwd 2X | (Shuttle) Plays forward 2X |
|
|
A.Dub Edit mode | Puts VCR into Audio Dub mode (same as button on VCR) |
| 044 | REC(ord) | |
| 045 | Express Programming Start Time + | |
| 046 | Index Search + | This code is ONLY index search. |
| 047 | Express Programming Stop Time + | |
| 048 | REC/Pause | Puts VCR in record, but paused |
| 049 | Express Programming Start Time - | |
| 050 | Index Search - | This code is ONLY index search. |
| 051 | Express Programming Stop - | |
| 052 | Play | |
| 053 | Fwd 1/6 | Plays forward 1/6X |
| 056 | Pause | Standard pause. Plays forward 1/6X if held down. |
| 059 | Power | |
|
|
Insert Edit mode | Puts VCR into Insert Edit mode (same as button on VCR). Counter must have negative time. |
| 061 | Digital On/Off | Toggles the Digital TBC/NR on/off |
| 068 | SAP tuner audio | Sets sound to SAP audio channel, if one is being broadcast. Standard stereo/mono otherwise. |
| 069 | TV | Sets tuner to broadcast TV frequencies |
| 070 | Rear Line Input (L-1) | Sets A/V input to Rear line inputs (channel 0) |
| 072 | Stereo tuner audio | Sets sound to standard stereo/mono. |
| 073 | CATV | Sets tuner to cable TV frequencies. |
| 074 | Eject | Ejects the tape (the most worthless remote code!!!) |
| 079 | Front Line Input (R-1) | Sets A/V intput to Front line inputs. |
| 080 | Jog + | |
| 084 | 12 | Types '12' |
| 085 | 8 | Types '8' |
| 086 | 14 | Types '14' |
| 087 | 10 | Types '10' |
| 088 | 13 | Types '13' |
| 089 | 9 | Types '9' |
| 091 | 11 | Types '11' |
| 098 | Jog - | |
| 100 | OSD position shift | Each code sent shifts the OSD display to the right, up to a point. It then jumps to the left side, and shifts right again. |
| 106 | ? | Displays an 'A11' in the display. Hitting Channel Up or Down makes the brightness go up or down. You can type numbers between 0 and 29. I think each number may 'adjust' something else. Be carefull!! |
| 109 | Rev 1/6 | |
| 116 | Menu Right, Index +, TimeScan+ | Menu Right in menu mode, Index + if tape stopped, TimeScan+ if playing. |
| 117 | TV/VCR off | Sets RF connection to antenna/CATV passthru. |
| 120 | Menu Left, Index -, TimeScan- | Menu Left in menu mode, Index - if tape stopped, TimeScan- if playing. |
| 121 | TV/VCR on | Sets RF connection to VCR mode. |
| 122 | Audio mode | Toggles playback audio between Hi-Fi, Hi-Fi Right, Hi-Fi Left, Normal, and Hi-Fi/Normal mix. |
| 123 | TV/VCR | Toggles RF connection between VCR and antenna/CATV. |
| 132 | Hi-Fi audio | Sets playback audio to Hi-Fi |
| 133 | Video Calibration Off | Disables Video Calibration (there appears to be no matching ON code) |
| 136 | Normal audio | Sets playback audio to Normal (linear) |
| 150 | Clear | Clears tape timer to 00:00:00 |
| 152 | Timer | Puts VCR in Timer mode |
| 153 | SP/EP | Toggles tape record speed between SP and EP |
| 154 | Menu | Displays menu |
| 155 | 0 | Types '0' (zero) |
| 156 | Rev 1X | (Shuttle) Plays backwards at 2X |
| 157 | Rev slow | (Shuttle) Plays backwards 1/6X |
| 158 | Jog - | (Shuttle) Plays backward 1/30X |
| 159 | Rev 2X | (Shuttle) Plays backwards at 7X (or 5X?) |
| 160 | Rev 1X | (Shuttle) Plays backwards at 1X |
| 161 | Rev 2X | (Shuttle) Plays backwards at 5X (or 7X?) |
| 162 | Rev slow | (Shuttle) Plays backwards 1/30X |
| 163 | Rev 2X | (Shuttle) Plays backwards at 2X |
| 174 | Express Programming Date + | |
| 177 | Prog(ram) | Goes to Program screen where you enter VCR+ code. Hit any of the Express Programming keys to do standard programming. |
| 178 | Express Programming Date - | |
| 179 | Index Search - | |
| 180 | Eject | Another one! |
| 182 | FF | Fast Forward |
| 186 | REW | Rewind |
| 187 | Stop | |
| 190 | Channel -, Menu Down | Changes tuner channel and Express Programming channel, menu down in menu mode |
| 191 | Channel +, Menu Up | Changes tuner channel and Express Programming channel, menu up in menu mode |
| 212 | 4 | Types '4' |
| 213 | 0 | Types '0' (zero) |
| 214 | 6 | Types '6' |
| 215 | 2 | Types '2' |
| 216 | 5 | Types '5' |
| 217 | 1 | Types '1' |
| 218 | 7 | Types '7' |
| 219 | 3 | Types '3' |
| 226 | ? | Displays '0007' on panel display. Code toggles between that and normal |
| 227 | 3X | Plays tape at 3X speed |
| 228 | Digital light on/off | Locks the Digital TBC/NR light ON, even when VCR is off. Digital can still be turned on and off. Sending the code again restores normal function. |
| 229 | Stop (with delay?) | Stops the VCR, but with a short delay (?) |
| 230 | Turn Audio Dub mode off | |
| 232 | Turn Audio Dub mode on | |
| 233 | ? | Displays 'E--:__' in display. Code toggles between that and normal. |
| 234 | Index - | |
| 237 | Rev 1/2 | Plays tape 1/2 speed backwards |
| 239 | Fwd 1/2 | Plays tape 1/2 speed forwards |
| 241 | Fwd 1/2 | Plays tape 1/2 speed forwards |
| 242 | Fwd 1/2 | Plays tape 1/2 speed forwards |
| 245 | Ch- | Changes channel only |
| 246 | Enter/OSD | |
| 247 | Off | Turns VCR Off |
| 248 | On | Turns VCR On |
| 249 | Ch+ | Changes channel only |
| 250 | Audio Mode | Cycles between playback audio modes |
NOTE: (Shuttle) commands need to be held down (sent continuously) to work. Otherwise, they just put the VCR in pause.
Updated January 3, 1999.