Final Assembly

ARP Main Studs and Main Cap installed, clearences check

Crankshaft, Bearings, and Oil Piston Squirters installed

Piston skirts and Oil Jet clearences check

Main Cap Torqued, Crankshaft, Bearings, and Main Cap clearences check, check, and check

Connecting Crower Rods and CP Pistons Installed

Taking all the new parts out

Head and Block operation in progress

Measuring Spring Install Height

Checking Spring Seat Pressure and Install Height

Checking Turbo Cam Bearing Clearances

Measuring Turbo Cam, Cam Towers, and Spring Clearance

Checking Valve to Piston Clearance on #1 Cylinder

Degreeing in the camshaft to cam centerline

Balancing

Blueprinting

Valve Springs Installed, Open and Close Pressure Check

Head shaved, Valves installed and clearence check

Crank, Rods, and Pistons installed

ARP Head Studs installed

KA24DE Cometic Headgasket with front timing cover cut off

Test fitting Cometic Headgasket

Spraying on copper coating

Front timing cover installed

Installing headgasket along with silicon sealant on front timing cover

Installing the Head and torquing it down

Installing Turbo Cam and cam towers

Adjustable Solid Rocker Arms Installed

Intake Side Solid Rocker Adjustable Arms

Test fitting Intake Manifold

Test fitting Throttle Bodies with custom machine O-rings

Wide Open Throttles!!!!

Superior Flow to the intake valves

Complete Intake Manifold test fitment

Power steering pump bracket custom machined to make room for manifold and water outlet

Test fitting Turbine Housing, Tial Wastegate and IAP Turbo Manifold.